New pipeline inspection technologies unveiled

[加入收藏][字號: ] [時間:2008-12-31  來源:JPT  關注度:0]
摘要:New pipeline inspection technologies unveiled GE Oil and Gas’ PII Pipeline Solutions is adding new tools to its portf...
New pipeline inspection technologies unveiled

GE Oil and Gas’ PII Pipeline Solutions is adding new tools to its portfolio of pipeline inspection technologies. The EmatScan CD and MagneScan in-line inspection tools both promise greater efficiency in detecting cracks and corrosion well before a problem arises.

EmatScan CD

This technology applies PII Pipeline Solutions’ Electro Magnetic Acoustic Transducer (EMAT) technology to detect evidence of stress corrosion cracking (SCC) and individual cracks in gas pipelines.

Unlike conventional ultrasonic inspection methods, which require gas pipelines to be filled with a liquid or have the tools run in a liquid batch, EmatScan CD does not require a liquid medium for its signals to reach the pipe wall. This provides operators cost savings by avoiding preinspection preparation and eliminates the introduction of foreign liquids in the pipeline to obtain accurate inspection data.

The system reportedly can detect cracks as short as 1.97 in. (50 mm) in length and as shallow as 0.079 in. (2 mm). It can also detect subcritical SCC colonies before a problem arises, which gives advanced warning on the need to implement an SCC management program and avoids the necessity of performing high-cost, production-limiting hydrostatic testing.

The greater data accuracy afforded by the tool reportedly allows critical SCC and other cracks to be effectively isolated and evaluated in order to prioritize repair activities and minimize the amount of digging and disruption to a pipeline’s normal operation. The tool also identifies specific types of cracks, such as longitudinal fatigue cracks, hook cracks, lack-of-fusion cracks, and cracks in or adjacent to the seam weld.

The company states that by making repeated inspection runs with the tool, an operator can determine growth rates and mechanisms associated with subcritical crack colonies, which assists with the overall crack management strategy of any gas pipeline.

MagneScan 


PII Pipeline Solutions also recently unveiled its next-generation MagneScan technology, an improved version of previous MagneScan versions that uses magnetic fields and various sensor combinations to detect corrosion and other faults in pipelines.

The tool uses the magnetic flux leakage principle to locate metal loss. As the tool moves through the pipe, permanent magnets magnetize the internal pipe wall via wire brushes that contact the wall. Flux density is given to the point of saturation, and any change in pipe wall thickness results in a disturbance of the magnetic field. Sensors read these disturbances and record the data, which is then analyzed to obtain characteristics of the flux leakage to establish the dimensions of the anomaly in the pipe.

The tool also possesses a ring of secondary sensors that discriminate between internal and external metal loss, odometer wheels that log the distance traveled, an internal pendulum that records the orientation of the tool in the pipeline, and a time-based marker system that logs the tool’s time of passage.

The newest version of the tool boasts improved magnetizer design and more advanced sensor technology over the previous generation. The tool is also equipped with a fully integrated high-resolution caliper, EMAT sensors to measure wall thickness, and geographic information system (GIS) mapping technologies for improved data alignment. The new MagneScan can detect corrosion at 5% of wall thickness with 90% probability of detection, and the depth-sizing accuracy is +/? 10% at 90% certainty.

The company states that the tool is smaller than previous generations, lighter, and easier to manage. The unit is capable of navigating and inspecting tight bends and restrictions, including back-to-back bends with a 1.5 D radius (i.e., the bend is 1.5 times the nominal pipe diameter). The tool is also easier to launch and receive without the need for pipeline modifications, and requires fewer field technicians for deployment.

As with previous MagneScan versions, the new tool can be used in any pipeline inspection scenario, including dry or liquid product, onshore or subsea. The new tool will be available for 6-, 8-, and 10-in. lines in select customer markets as of December 2008. The technology will become widely available in core markets beginning in the summer of 2009, with larger diameter versions to follow.


          您的分享是我們前進最大的動力,謝謝!
關于我們 | 會員服務 | 電子樣本 | 郵件營銷 | 網站地圖 | 誠聘英才 | 意見反饋
Copyright @ 2012 www.tolkopozitiv.com Inc All Rights Reserved 全球石油化工網 版權所有
京ICP證120803號 京ICP備05086866號-8 京公網安備110105018350
主站蜘蛛池模板: 久久久久久久久女黄9999| 亚洲国产精品乱码在线观看97| 131美女爱做视频| 日本一区二区三区在线观看视频 | 拍拍拍无挡免费视频网站| 亚洲色图综合网站| 性xxxx黑人与亚洲| 成人影院wwwwwwwwwww| 亚洲成a人片在线观看播放| 蜜桃成熟时3之蜜桃仙子电影| 奇米影视亚洲春色| 亚欧在线精品免费观看一区| 精品国产免费人成网站| 国产精品无码DVD在线观看| 中文无码AV一区二区三区| 欧美激情一区二区三区在线| 国产中文字幕电影| 91精品啪在线观看国产91九色| 日本不卡高清中文字幕免费| 亚洲第一香蕉视频| 色哟哟免费在线观看| 国产网站麻豆精品视频| 中文字幕亚洲综合久久| 欧美交a欧美精品喷水| 午夜视频十八嗯嗯啊免费| jizzjizz之xxxx18| 好男人视频在线观看免费看片| 亚洲AV成人噜噜无码网站| 男人影院天堂网址| 国产人成无码视频在线观看| 99re在线视频观看| 无码人妻一区二区三区免费视频 | 人妻丰满熟AV无码区HD| 野花高清完整在线观看免费8| 国产草草影院ccyycom| 中文天堂在线最新版在线www| 最近高清中文在线国语字幕| 免费国产小视频在线观看| 韩国一区二区三区视频| 国产美女无遮挡免费视频| 一级做a爰片性色毛片新版的|